If you build the boogie board variant of the Maker Boat Basic, you need the following 3D printed parts:
- 2 x fins
- 1 x right bracket
- 1 x left bracket
- 1 x front bracket
The 3D printed brackets attach the T200 thrusters to the bottom of the boogie board and hold the junction box in place on the top. Fins protect the thrusters from colliding with the bottom and keep them out of the sand and dirt when not in the water. They attach to the bottom of the boogie board and are held in place brackets on the top of the boogie board. All 3D printed parts are held in place with sections of 3 mm threaded rod that are trimmed to fit each piece using a hacksaw. The images below show the locations of each part.
Printer Settings
We printed these parts in Prusament PETG using a Prusa i3Mk3. The stl files were sliced using the Prusa Slicer. Our print settings were: 0.15 mm layer height, 20% infill, no supports.
If you have printed all the parts in this list and you have finished constructing the junction box, you can mount everything to your boogie board!